Product ID:EUTECROD 1900
MSDS Date:06/24/1992
FSC:3439
NIIN:00N080097
MSDS Number: CFRZL

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 15 MG/M3 (MFR)

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST

ZINC (SARA 313) (CERCLA) (MFR INVALID CAS # 7440-66-5)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

INGS SECTION, PLUS THOSE OF BASE METAL & COATING,

RTECS: 9999999ZZ

COMPLEX OXIDES OF METALS LISTED IN

RTECS: 9999999ZZ

METAL OXIDES, CARBON & SILICA. GASEOUS RXN PRODS MAY

RTECS: 9999999ZZ

OXIDES, & CERTAIN INERT GASES USED AS SHIELDING

RTECS: 9999999ZZ

& GASES TO WHICH WORKERS ARE EXPOSED IS TO TAKE AIR

RTECS: 9999999ZZ

BRTHG ZONE. SEE ANSI/AWS 11.1 AVAIL FROM AMERICAN

RTECS: 9999999ZZ

ALSO FROM AWS F1.3 "EVALUATING CONTAMINANTS IN THE

RTECS: 9999999ZZ

WHICH GIVES ADDITIONAL ADVICE ON SAMPLING. FOR MORE

RTECS: 9999999ZZ

LUNG FIBROSIS, PNEUMOCONIOSIS/SIDEROSIS

RTECS: 9999999ZZ

CAUSED BY INHAL OF CERTAIN METALLIC CMPDS DURING

RTECS: 9999999ZZ

SYMPS ARE SIMILAR TO INFLUENZA TYPE SICKNESS INCL

RTECS: 9999999ZZ

DRYNESS OF NOSE & MOUTH, MUSC PAIN, NAUS & VOMIT.

RTECS: 9999999ZZ

MAY LAST 3-24 HRS. CONSULT MD IMMED IF ANY OF THESE

RTECS: 9999999ZZ

POSS DRYING & MECH IRRIT. EYE CONT CAN

RTECS: 9999999ZZ

MILD PULMONARY IRRITATION & POSSIBLE NON-DISABLING

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: LITTLE/NO HAZS EXIST FOR ARC
WELDING ELECTRODES & BRAZING RODS BEFORE THEY ARE USED IN WELDING
PROCESS. INHAL: FUMES ASSOC W/HEATING, WELDING, BRAZING,
SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR HLTH & OVEREXP
CAN CAUSE LUNG DMG &/OTHER ORGAN DMG. EYES/SKIN: ARC RAYS &
ULTRAVIOLET LIGHT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAN INJURE EYES & BURN SKIN. LIQS
USED IN FLUXES & CHEM AIDS MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC
SHOCK CAN KILL. INGEST: DANGER! MAY BE HARMFUL/FATAL IF SWALLOWED.
GEN WELDING FUMES: SHORT TERM OVEREXP MAY RSLT IN DIZZ,
NAUS/DRYNESS/IRRIT OF NOSE, THROAT/EYES. EXCESS OVEREXP MAY CAUSE
BRONCH ASTHMA,(ING 12)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL: MOVE TO FRESH AIR SOURCE. CONT MD & ADVISE ON
INGREDIENTS. SKIN: THORO WASH HANDS/AFFECTED AREAS W/SOAP & WATER
TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD. EYES:
THORO FLUSH W/WAT ER FOR AT LEAST 15 MIN TO REMOVE ALL RESIDUE.
OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEM AIDS. ADVISE MD OF
INGREDIENTS. INGEST: CALL MD &/OR LOCAL POISON CONTROL CENTER.
ADVISE OF INGREDIENTS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . TOXIC FUMES MAY BE PRODUCED.
Unusual Fire/Explosion Hazard:REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCESSES. ELECTRODE/BRAZE/SOLDERS:
NON-FLAMM. WELDING ARC, SPKS & FLAMES CAN (SUP DAT)

Spill Release Procedures:USE APPROPRIATE MEASURES TO KEEP AIRBORNE DUST
LEVELS CONTAINED IN ACCORDANCE WITH EXPOSURE LEVELS OF INGREDIENTS
SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY
FROM THE FUME/DUST PLUME.
Other Precautions:PLEASE READ & UNDERSTAND PROD LABEL INFO FOR PROPER
PROC & USE. SEE ANSI Z49.1, "SFTY IN WELDING & CUTTING" & CHAPTER
11 OF "THERMAL SPRAYING", PUBLISHED BY AMERICAN WELDING SOCIETY &
OSHA PUBLICATION 2206 (29 CFR 1910) FOR MORE DETAILS.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST OUT OF WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: IGNITE COMBUSTS & FLAMMS. SOME FLUXES & CHEM ACIDS MAY GIVE
OFF HYDROGEN CHLORIDE, PHOSGENE & CHLORINE GASES. CANS, UNDER
PRESS, & FLAMMS MAY EXPLODE. HAZ DECOMP PROD: & FORM FROM INGS LIST
ED. DECOMP PRODS OF NORM OPERATION INCLTHOSE ORIGINATING FROM
VOLATILIZATION, RXN/OXIDATION OF MATLS SHOWN IN (ING 4)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DURING WELDING, THERMAL SPRAYING &
ALLIED PROCESSES, FUME & GAS DECOMP PRODS GENERATED ARE DIFFERENT
IN PERCENT(SUP DAT)

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS, GRINDING, OR
FILTER RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.